Articles

012-189A Finisher Jam RAPProcedureClear the paper jam and repeat the job.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):• 106R03733 106R03736 106R03735 106R03734Drum Chip:• 113R00780 113R00782

012-189 Finisher Jam Entry RAP012-189 The finisher entry sensor was detected on before the previous sheet had left the finisher.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-210A NVM Fail RAP.• Office finisher LX installed, 012-210B NVM Fail RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East...

012-161B Set Eject Jam RAPBSD-ON:BSD 13.10 Office Finisher LX Tamping and Offset (2 of 2)BSD-ON: BSD 13.13 Office Finisher LX Eject Control (1 of 2)ProcedureNOTE: Ensure the correct RAP is performed, refer to the 012-161 Set Eject Jam Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Enter dC330 012-151. Actuate the compiler tray no paper sensor, PL 13.28 Item 9. The display changes. If YES, go to 9. If...

012-161A Set Eject Jam RAPBSD-ON: BSD 12.6 Integrated Office Finisher Set Eject (1 of 2)Initial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-161 Set Eject Jam Entry RAPWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the eject home sensor, PL 12.26 Item 9 is correctly installed, not broken, and has no foreign object.• Switch off, then switch on the machine, GP 10.Procedure1. Check the specification of...

012-161 Set Eject Jam Entry RAP012-161 In the eject motor’s ejecting operation, eject home sensor on was detected within a specified time after the start of the reverse operation of the eject motor.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-161A Set Eject Jam RAP.• Office finisher LX installed, 012-161B Set Eject Jam RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743...