Articles

075-135 Registration Sensor Jam (Bypass Tray) RAPBSD-ON: BSD 8.1 Tray 1 and Bypass Tray Paper TransportationBSD-ON: BSD 8.5 Registration075-135 Paper does actuate the registration sensor in the specified time after the registration clutch is energized when feeding from the bypass tray.Initial Actions• Check the condition of the paper in the bypass tray. Refer to GP 15 Paper and Media Size Specifications• Check that the paper guides are set correctly.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or...

074-105 Registration Sensor Jam (Tray 4) RAPBSD-ON: BSD 8.5 Registration074-105 The registration sensor did not actuate within the specified time after the registration clutch initialized during paper feed from tray 4.Initial ActionsCheck the condition of the paper in tray 3. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check a Motor.•...

074-101, 103, 900 Tray 4 Misfeed RAPBSD-ON: BSD 7.12 Tray 4 Paper Stacking (3TM)BSD-ON: BSD 8.4 Tray Module Paper Transportation (3TM)BSD-ON: BSD 8.10 Tray Module Paper Transportation (TTM) (2 of 2)074-101 Paper does not actuate the tray 4 feed out sensor within the specified time after tray 2 feed start.074-103 The tray 4 feed out sensor detected remaining paper.074-900 The tray 4 feed out sensor detected remaining paper.Initial ActionsCheck the condition of the paper in tray 4. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that...

073-106 Tray 2 Feed Out Sensor RAP073-106 Paper does not deactuate the tray 2 feed out sensor within the specified time after each tray feed start.ProcedurePerform the 072-101, 072-900 Tray 2 Misfeed RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745...

073-105 Registration Sensor Jam (Tray 3) RAPBSD-ON: BSD 8.5 Registration073-105 The registration sensor did not actuate within the specified time after the registration clutch initialized during paper feed from tray 3.Initial ActionsCheck the condition of the paper in tray 3. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check a Motor.•...