Articles

077-126, 077-902 Exit 2 Sensor Jam RAPBSD-ON: BSD 10.5 Fused Paper Exit 2077-126 After actuating the fuser exit sensor, paper did not actuate the exit 2 sensor within the specified time.077-902 The exit 2 sensor detected remaining paper.Initial ActionsCheck the condition of the paper in all trays. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:•...

077-123 Registration Sensor Jam (Duplex) RAPBSD-ON: BSD 8.5 RegistrationBSD-ON: BSD 10.7 Duplex Transport077-123 Paper does not actuate the registration sensor in the specified time after the registration clutch in energized in duplex mode.Initial ActionsCheck the condition of the paper in all trays. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check...

077-105 Exit Sensor 2 Jam RAPBSD-ON: BSD 10.5 Fused Paper Exit 2077-105 The trail of the paper was late from the exit 2 sensor.Initial ActionsCheck the condition of the paper in all trays. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.WARNING: Do not touch the fuser while it is hot.Refer to the procedures that follow as necessary:• GP 6 How to Check...

077-104, 109, 113, 901 Fuser Exit Sensor Jam RAPBSD-ON: BSD 10.3 Fusing077-104 The trail edge of the paper deactuated the fuser exit sensor earlier than the specified time.077-109 The fuser exit sensor did not actuate within the specified time after the registration clutch energized.077-113 The trail edge of the paper deactuated the fuser exit sensor later than the specified time.077-901 The fuser exit sensor detected remaining paper.Initial Actions• Check the condition of the paper in all trays. Refer to GP 15 Paper and Media Size Specifications• Ensure that the fuser is installed correctly.ProcedureWARNING: Ensure that the electricity to the machine...

077-101, 077-900 Registration Sensor Jam RAPBSD-ON: BSD 8.5 Registration077-101 The trail edge of the paper does not deactuate the registration sensor within the specified time after the registration clutch is energized.077-900 The registration sensor detected remaining paper.Initial Actions• Check the condition of the paper in all trays. Refer to GP 15 Paper and Media Size Specifications.• Ensure that all the trays are loaded correctly.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause...