Articles

012-303 Finisher horizontal Transport Cover Open RAPBSD-ON: BSD 13.5 Office Finisher LX Horizontal Transport012-303 The finisher horizontal transport cover is open.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the installation of the horizontal transport open sensor, PL 13.08 Item 3.• Check that the finisher horizontal transport cover can be opened and closedProcedure1. Enter dC330 code 012-303. Actuate the horizontal transport open sensor. The display changes. If YES, go...

012-300 Eject Cover Open RAPBSD-ON: BSD 13.3 Office Finisher LX Interlock Switching012-300 Eject cover switch open was detected.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Ensure that the eject cover, PL 13.25 Item 1 is closed.• Check the eject cover switch, PL 13.27 Item 19 for improper installation.• Check eject cover switch connectors for connection failure.• Check the switch actuator for damage.Procedure1. Enter dC330 code 012-300. Actuate the eject...

012-295, 012-296 Stapler Move Position Sensor Fail RAPBSD-ON: BSD 13.11 Office Finisher LX Staple Positioning012-295 occurs when:• After the stapler started moving to the staple position, the stapler move position sensor did not turn on within 2 seconds.• After the stapler completed moving to the staple position, the stapler move position sensor did not turn on.012-296 occurs when:• After the stapler started moving to the staple position and the staple move sensor turned off, the staple move sensor did not turn off within 500ms.• After the staple position had been fixed, the staple move sensor turned off.• After the staple...

012-269 Booklet PWB Communications Fail RAP012-269 Communications between the finisher PWB and the booklet PWB failed.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the connectors at the finisher PWB and the booklet PWB are connected or seated correctly• Check the wiring between the finisher PWB and the booklet PWB for damage.Procedure1. Switch off, then on switch on the machine, GP 10. Enter dC330 code 013-161 to detect the...

012-268 Booklet Rear Stapler Fail RAPBSD-ON: BSD 13.4 Office Finisher LX Booklet Interlock SwitchingBSD-ON: BSD 13.18 Office Finisher LX Booklet Staple Control (2 of 2 - Rear)012-268 The booklet rear staple home switch is not on (does not return to home position) within the specified time after the booklet rear staple motor starts to reverse.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Check the booklet rear stapler for jammed staples...