How to Perform 020G Fax Module Checkout RAP for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on

020G Fax Module Checkout RAP

Use this RAP to check for problems with the fax PWBs.

Initial Actions

WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.

• Switch off, then switch on the machine, GP 10.
• For image quality defects, perform the IQ27 Unfused Copy/Toner Offset RAP.
• Initialize the System NVM, refer to dC301.


Switch off the machine GP 10. Disconnect the components that follow:

• If installed, the line 2 and 3 fax PWBs, PL 20.05 Item 15.
• The line 1 fax PWB, PL 20.05 Item 10 from the riser PWB.
• The the fax USB harness, PL 20.05 Item 2 from the ESS PWB.

Check that the connectors are clean and not damaged. If the connectors are damaged, install new components as necessary:

• Line 1 fax PWB, PL 20.05 Item 10.
• Line 2 or 3 fax PWB, PL 20.05 Item 15.
• Riser PWB, PL 20.05 Item 16.
• Fax USB harness, PL 20.05 Item 2.
• ESS PWB, PL 3.10 Item 6.

**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post

← Older Post Newer Post →

Leave a comment