How to Enter dC671 Registration Measurement Cycle for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on


This procedure checks and adjusts color registration:

• Performs measurement to determine the condition of the registration control.
• Checks that the belt controls are operating normally.
• Measures/displays the amount of color shift relative to black.
• Displays the results as either OK or NG (OK=Good/Pass, NG=Not Good/Fail).


1. Enter Diagnostics, GP 1.
2. Touch dC671 Registration Measurement Cycle.
3. Touch Start, the Registration Measurement Cycle Processing message displays.
4. Wait for the process to complete, then touch Close.
5. OK or NG is displayed in the Result column for each row.
6. Touch Close to return to the Diagnostics screen.
7. Exit diagnostics, GP 1.

**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post

← Older Post Newer Post →

Leave a comment