How to Enter dC612 Print Test Pattern for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on


To print the internal test patterns.

NOTE: All test prints should be printed long edge feed.


1. Enter Diagnostics, GP 1.
2. Touch dC612 Print Test Pattern.
3. Select the test pattern required. Refer to IQ1 Image Quality Entry RAP. Select from the available options for the required test pattern:

• Pattern number
• Quantity
• Paper Supply
• Cin%
• Screen
• Output destination
• 1 sided or 2 Sided

4. Touch the Start button.
5. Touch the Close button to return to the diagnostics screen.
6. Exit diagnostics, GP 1.

Pattern Numbers and Images

NOTE: If the settings for a test pattern are incorrect, an error message is displayed and the test pattern will not be printed. In this case, ensure the settings match the requirements listed in IQ1 Internal Test Patterns, then repeat the test print.

**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post

← Older Post Newer Post →

Leave a comment