Articles

016-570 Job Ticket Out of Memory RAP016-570 XPIF memory is low.ProcedureIncrease memory size for job ticket on UI Panel. Switch off, then switch on the machine, GP 10. Run the job.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747...

016-568 Backup Restore Failed RAP016-568 NVM data could not be backed up or restored.ProcedurePerform the steps that follow:1. Format the hard disk. Refer to dC355 Image Disk Diagnostics.2. Before performing the restore using the HDD backup file, delete backup files.3. For USB backup, check that the USB memory is correctly installed. If the fault persists, use a PC to format the USB Memory.4. When performing restore using USB backup files, check that the USB memory is correctly installed. If the fault persists, delete the backup files.5. If the problem still persists, use a PC to format the USB memory.**This RAP...

016-567 Backup Capacity Full RAP016-567 NVM data to back up is over the capacity of the destination to save it.ProcedurePerform the steps that follow:1. Before performing the HDD backup, delete existing backup files through to increase the capacity.2. Before performing USB backup, delete the backup files in the USB memory, or use a PC to delete unnecessary files on the USB memory to increase the capacity.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner...

016-566 Backup Restore Condition Error RAP016-566 NVM backup/restore condition error.ProcedureAdvise the customer to:1. During backup, save the FW download file into the ‘dwld’ directory in the USB memory, connect it the machine, then perform the backup.2. During restore, use the same IOT and IIT ROM versions as those during backup. When performing restore using a USB backup file, also use the same HDD configuration.3. If there is no HDD, use the same ESS ROM versions as well. If the same configuration cannot be attained, delete the backup file from the panel.4. If the problem occurred at an attempt to restore...

016-565 Backup Restore Error RAP016-565 Backup/restore error.ProcedurePerform the steps that follow:1. For USB backup, check that the USB memory is correctly installed. If the fault persists, use a PC to check the USB memory for a ‘backup’ directory. If it is not there, create it.2. When performing restore or deletion of backup files from the USB backup file, check that the USB memory is correctly installed.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner...