Articles

016-706 Maximum User Number Exceeded RAP016-706 The system detected that a job exceeded the maximum number of users for secure and sample prints and aborted the job.ProcedurePerform the steps that follow:1. Advise the customer to delete unnecessary documents or users, then repeat the operation.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757...

016-705 Secure Print Fail RAP016-705 Unable to perform secure print/mailbox print/pay for print storing from the printer driver. Unable to store scanned documents into a mailbox.ProcedurePerform the steps that follow:1. Advise the customer to check that the required optional software is installed and enabled. Also check that the correct print driver is being used.2. If the fault persists, perform the steps that follow:a. Reload the software, GP 4.b. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.c. Initialise the hard disk. Refer to dC355 Image Disk Diagnostics.d. Install new components as necessary:• Hard disk,...

016-704 Mailbox Full RAP016-704 The system detected that a mailbox was full (it exceeded the maximum number of documents per box) and aborted a job.ProcedurePerform the steps that follow:1. Advise the customer to delete unnecessary documents, then repeat the operation.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737...

016-703 Email To Invalid Box RAP016-703 When receiving Email, fax or internet fax, an invalid (not setup) mailbox number is selected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to:a. Check whether the selected mailbox is set up correctly.b. Have Email, fax or internet fax sent to a valid mailbox.2. Ensure all fax PWBs are correctly installed, PL 20.05.3. Reload the software, GP 4.4....

016-702 Out of Page Buffer RAP016-702 Unable to compress any page due to insufficient print page buffer.ProcedurePerform the steps that follow:1. Advise the customer to:a. Set Print Mode to High Speed and reduce the print resolution. Retry the operation.b. Increase the memory to increase the page buffer.c. Retry the operation in Print Page Mode.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North...