How to Fix 060-341 to 060-356 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on

060-341 to 060-356 LPH Fault RAP

BSD-ON: BSD 6.4 LED Control (Y, M), BSD 6.5 LED Control (C, K)

060-341 Large pixel count error between the video output and yellow LPH. Image abnormality may occur.
060-342 Large pixel count error between the video output and magenta LPH. Image abnormality may occur.
060-343 Large pixel count error between the video output and cyan LPH. Image abnormality may occur.
060-344 Large pixel count error between the video output and black LPH. Image abnormality may occur.
060-345 Communication error between ESS and yellow LPH. Possibly caused by an external noise.
060-346 Communication error between ESS and magenta LPH. Possibly caused by an external noise.
060-347 Communication error between ESS and cyan LPH. Possibly caused by an external noise.
060-348 Communication error between ESS and black LPH. Possibly caused by an external noise.
060-349 Yellow LPH reset due to a noise was detected. Possibly caused by an external noise.
060-350 Magenta LPH reset due to a noise was detected. Possibly caused by an external noise.
060-351 Cyan LPH reset due to a noise was detected. Possibly caused by an external noise.
060-352 Black LPH reset due to a noise was detected. Possibly caused by an external noise.
060-353 Large pixel count error between the video output and yellow LPH. Image abnormality may occur.
060-354 Large pixel count error between the video output and magenta LPH. Image abnormality may occur.
060-355 Large pixel count error between the video output and cyan LPH. Image abnormality may occur.
060-356 Large pixel count error between the video output and black LPH. Image abnormality may occur.

Procedure

WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.

1. Switch off, then switch on the machine, GP 10.
2. Check the connections and ribbon cable between the LPH and the ESS PWB (Yellow, P/J1360, Magenta P/J1361, Cyan, P/J1362, Black, P/J1363).
3. If the fault persists, install new components as necessary:

• LPH, PL 60.35 Item 1.
• LPH FFC:

– Black LPH FFC, PL 60.35 Item 4.
– Cyan LPH FFC, PL 60.35 Item 5.
– Magenta LPH FFC, PL 60.35 Item 6.
– Yellow LPH FFC, PL 60.35 Item 7.

• ESS PWB, PL 3.10 Item 6.

**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post



← Older Post Newer Post →


Leave a comment