How to Fix 005-945 005-947 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
005-945, 005-947 Fast Scan Size Mismatch Jam RAP
BSD-ON: BSD 5.5 Document Feeding (2 of 2)
005-945 Fast scan direction (width) size mismatch was detected during CVT no-mix, or CVT slow scan.
005-947 Fast scan direction (width) size mismatch was detected during CVT no-mix, or CVT slow scan.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Check the size of the document that was fed by the user.
2. Enter dC330. Check the sensors that follow:
• Code 005-218, DADF APS sensor 1,PL 5.50 Item 8.
• Code 005-219, DADF APS sensor 2, PL 5.50 Item 8.
• Code 005-220, DADF APS sensor 3, PL 5.50 Item 8.
3. If the fault persists, install a new DADF PWB, PL 5.10 Item 11.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
BSD-ON: BSD 5.5 Document Feeding (2 of 2)
005-945 Fast scan direction (width) size mismatch was detected during CVT no-mix, or CVT slow scan.
005-947 Fast scan direction (width) size mismatch was detected during CVT no-mix, or CVT slow scan.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Check the size of the document that was fed by the user.
2. Enter dC330. Check the sensors that follow:
• Code 005-218, DADF APS sensor 1,PL 5.50 Item 8.
• Code 005-219, DADF APS sensor 2, PL 5.50 Item 8.
• Code 005-220, DADF APS sensor 3, PL 5.50 Item 8.
3. If the fault persists, install a new DADF PWB, PL 5.10 Item 11.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782