How to Enter dC950 ATC Sensor Setup for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on


CAUTION: This procedure should only be performed after installation of a new ATC sensor or drum cartridge. Or when there is reason to believe that the calibration values in NVM are incorrect.

To acquire the sensitivity correction values (correction coefficient and correction offset) for adjusting the ATC sensor output from the bar code numbers which display the sensitivity attribute in every ATC sensor. The bar code numbers are set in NVM (bar code number) manually from this adjustment screen.


1. Enter Diagnostics, GP 1.
2. Touch dC950 ATC Sensor Setup.
3. Touch Bar Code No.
4. Touch on the - or + for Yellow, Magenta, Cyan and Black to decrease or increase any of these values between 0 and +99. Default values are 55 for all colors.
5. Touch OK.
6. Touch Start.
7. After the Successfully Completed message is displayed, touch Close.
8. Touch Close to return to the Diagnostics screen.
9. Exit diagnostics, GP 1.

**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post

← Older Post Newer Post →

Leave a comment