How to Enter dC675 Registration Control Setup Cycle for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on


This is a setup procedure to be used after removal of key marking module components such as:

• LPH.
• 2nd BTR.
• IBT belt.
• IBT cleaning unit.
• Belt module.
• Developer.

Function 1: This is a registration control full cycle that can be performed after NVM initialization. Performing this function corrects the color registration into the predefined range. The corrected shift amount for each color is saved in the NVM and it is displayed at normal completion.
Function 2: On entering a setup cycle, the IOT does not start. The registration control shift correction amount is displayed automatically on the UI screen and is used as a tool for determining the cause when a failure occurs.


1. Enter Diagnostics, GP 1.
2. Touch dC675 Registration Control Setup Cycle. Readings for all four colors are displayed
on the screen. Scroll down to view more readings
3. Touch Start, the Registration Control Setup Cycle Processing message displays.
4. Wait for the process to complete, then touch Close.
5. Touch Close to return to the Diagnostics screen.
6. Exit diagnostics, GP 1.

**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post

← Older Post Newer Post →

Leave a comment