GP 17 About Electrical Power Requirements for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
Power Requirements
Refer to Table 1.
Power Consumption
Refer to Table 2.
Operation Modes
Refer to Table 3 and Table 4.
**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
Refer to Table 1.
Table 1 Electrical power requirements
| Nominal Voltage | Average Current | Comments |
| 110-120VAC (60Hz) Plus 6% minus 10% |
Less than or equal to 12A RMS. | 50/60Hz plus 3% minus 3% |
| 220-240VAC (50Hz) Plus 10% minus 10% |
Less than or equal to 8A RMS. | 50Hz plus 3% minus 3% |
Power Consumption
Refer to Table 2.
Table 2 Power consumption
| Region | Voltage Power | Consumption Value (kW) |
| XC | 110-127VAC | 110VAC - 1.45 or less 127VAC - 1.67 or less |
| XE | 220-240VAC | 220VAC - 1.76 or less 240VAC - 1.92 or less |
Operation Modes
Refer to Table 3 and Table 4.
Table 3 Operation modes
| Mode | State |
| Run | Normal operation mode. |
| Ready | The state prior to entering run mode. |
| Low power | A lower power consumption mode than ready mode. |
| Sleep | A lower power consumption mode than low power mode. |
| Sub power off | The controller is maintained with the programs running. |
Table 4 IOT states
| Sub-System | Run Mode | Ready Mode | Low Power Mode | Sleep Mode | Sub Power Off Mode |
| Fuser | Maintaining operating temperature | Maintaining standby temperature | Maintaining low temperature | Off | Off |
| Xerographcs | Operating state | Off | Off | Off | Off |
| Print Head Assembly | Operating state | Off | Off | Off | Off |
| Fusing Fan | Temperature controlled slow or fast rotation | Temperature control in stop or rotate (slow) | Temperature control in stop or rotate (slow) | Off | Off |
| Marking Fan | Temperature controlled, either stopped or slow or fast rotation | Temperature control led either stop or slow rotation | Temperature control led either stop or slow rotation | Off | Off |
| ESS (Reference only) | Operating state | Standby | Standby | Ready to receive | Inactive |
| HDD | Accessible | Accessible | Accessible | Not accessible | Not accessible |
**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782