Articles

012-132B Entrance Sensor On Jam RAPBSD-ON: BSD 13.7 Office Finisher LX TransportationProcedureNOTE: Ensure the correct RAP is performed, refer to the 012-132 Entrance Sensor On Jam Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Enter dC330 code 012-100. Actuate the finisher transport entrance sensor, PL 13.35 Item 10. The display changes. If YES, go to 9. If NO, go to 2.2. Check the wiring between J8868 pin 2 and...

012-132 Entrance Sensor On Jam Entry RAP012-132 Finisher entrance sensor does not actuate within a specified time after receiving the sheet exit command (the sheet to be ejected has actuated the IOT exit sensor 1).ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-132A Entrance Sensor On Jam RAP.• Office finisher LX installed, 012-132B Entrance Sensor On Jam RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe...

012-132A Entrance Sensor On Jam RAPBSD-ON: BSD 12.3 Integrated Office Finisher TransportationInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-132 Entrance Sensor On Jam Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check that the finisher entrance sensor, PL 12.12 Item 19 is correctly installed and free from foreign objects and that the actuator is not broken.• Switch off, then switch on the machine, GP 10.Procedure1....

010-421 Fuser Life Warning RAPBSD-ON: BSD 10.2 Fusing Heat Control (1 of 2)010-421 Fuser replacement time.ProcedureInstall a new fuser, PL 10.05 Item 2.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered...

010-418, 010-420 Fuser Near Life Warning RAPBSD-ON: BSD 10.2 Fusing Heat Control (1 of 2)010-418 Fuser replacement time is approaching.010-420 Fuser replacement time is approaching.ProcedureNo service action necessary. Advise the customer that the fuser is near of life.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):•...