Articles

012-152A Compiler Exit Sensor On Jam RAPBSD-ON: BSD 12.3 Integrated Office Finisher TransportationInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-152 Compiler Exit Sensor On Jam Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the compiler exit sensor, PL 12.12 Item 16 is correctly installed and free from foreign objects and that the actuator is not broken.• Switch off, then switch on the machine, GP...

012-152 Compiler Exit Sensor On Jam Entry RAP012-152 The compiler exit sensor does not actuate within a specified time after receiving the sheet exit command (the paper to be ejected has actuated the IOT exit sensor 1).ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-152A Compiler Exit Sensor On Jam RAP.• Office finisher LX installed, 012-151B, 012-152B Compiler Exit Sensor Jam RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North...

012-151B, 012-152B Compiler Exit Sensor Jam RAPBSD-ON: BSD 13.7 Office Finisher LX TransportationInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-151 Compiler Exit Sensor Off Jam Entry RAP or the 012-152 Compiler Exit Sensor On Jam Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• (012-152 Only) Ensure that the chute assembly, PL 13.35 Item 16 is installed correctly.• Switch off, then switch on the machine, GP...

012-151A Compiler Exit Sensor Off Jam RAPBSD-ON: BSD 12.3 Integrated Office Finisher TransportationInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-151 Compiler Exit Sensor Off Jam Entry RAPWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the compiler exit sensor, PL 12.12 Item 16 is correctly installed and free from foreign objects and that the actuator is not binding.• Switch off, then switch on the machine, GP...

012-151 Compiler Exit Sensor Off Jam Entry RAP012-151 The compiler exit sensor does not deatuate within a specified time.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-151A Compiler Exit Sensor Off Jam RAP.• Office finisher LX installed, 012-151B, 012-152B Compiler Exit Sensor Jam RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip...