Articles

010-327 Fusing On Time Fail RAPBSD-ON: BSD 10.1 Fusing Heat Control (1 of 2)BSD-ON: BSD 10.2 Fusing Heat Control (2 of 2)010-327 The main lamp or sub lamp has been on continuously for longer than the setting time.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that the fuser is installed correctly.3. Ensure that the power supply...

005-945, 005-947 Fast Scan Size Mismatch Jam RAPBSD-ON: BSD 5.5 Document Feeding (2 of 2)005-945 Fast scan direction (width) size mismatch was detected during CVT no-mix, or CVT slow scan.005-947 Fast scan direction (width) size mismatch was detected during CVT no-mix, or CVT slow scan.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedure that follows as necessary:• GP 7 How to Check a Sensor.Perform the steps that follow:1....

005-940, 005-941 DADF No Original RAPBSD-ON: BSD 5.1 DADF Interlock and Document Setting005-940 A document was pulled out during document feed.005-941 Missing originals were detected.ProcedureReload the document.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767...

005-921 Letter SEF Detect ErrorBSD-ON: BSD 5.3 DADF Document Size Sensing (2 of 2)005-921 The DADF document guide width detected a letter SEF width.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedure that follows as necessary:• GP 7 How to Check a Sensor.Perform the steps that follow:1. Check the size of the document that was fed by the user.2. Enter dC330. Check the sensors that follow:• Code 005-215,...

005-917 DADF APS Sensor 3 Static Jam RAPBSD-ON: BSD 5.5 Document Feeding (2 of 2)005-917 DADF APS sensor 3 detected paper when powering on, closing the feeder cover or closing the DADF.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedure that follows as necessary:• GP 7 How to Check a Sensor.Perform the steps that follow:1. Enter dC330, code 005-220. Check the DADF APS sensor 3, PL 5.50 Item...