Articles

016-218 PS Kit Not Installed for XDOD RAP016-218 The PS Kit required for XDOD function was not installed.ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Advise the customer that the postscript kit is required.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East...

016-217 SW Option Fail (Controller ROM) RAP016-217 Controller ROM does not support printer kit.ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748...

016-215, 016-216 SW Option Fail RAP016-215 The scanner functions cannot be executed due to a JPEG board error or JPEG board not installed.016-216 The system detected that the extension memory was not installed.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Install a new ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service Manual. All brand...

016-214 SW Option Fail (Fax Card) RAP016-214 The fax card was not installed or an error was detected when SW optional function was enabled.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure all fax PWBs are correctly installed, PL 20.05.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may...

016-213 SW Option Fail (Printer Card) RAP016-213 The PRT_CARD was not installed or an error was detected when optional function software (internet fax kit) was enabled.ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For...