Articles

016-233 SW Option Fail (USB Host Not Installed) RAP016-233 Any one of the SW optional functions cannot be used because the USB host has a failure or is not installed.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Reload the software, GP 4.3. Install a new ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service Manual....

016-232 MRC HW Initialize Error RAP016-232 MRC HW initialize error. an error has occurred during high compression board initialization.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Reload the software, GP 4.3. Install a new ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may...

016-230 License Required (PS Image Log Kit) RAP016-230 The PS-ROM was installed with 'SW key: Image Log Kit for PS' in disabled state.ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Set the image log kit SW key to ‘Enabled’.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip...

016-220 to 016-226, 240 S2X Error RAP016-220 A unrecoverable error was detected at the S2X PWB.016-221 Communication with the S2X PWB has failed.016-222 An error has occurred in the S2X PWB self-diagnostics.016-223 The S2X PWB has failed the write/read test of the internal SDRAM.016-224 The S2X PWB has failed to access to the internal PCI space.016-225 The S2X PWB failed the ROM check sum test.016-226 The S2X PWB failed to detect the video clocks sent from the IIT.016-227 The S2X PWB failed the write/read test of the internal DDR memory.016-228 The S2X PWB failed the desired value comparison of the...

016-219 License Required (Printer Kit) RAP016-219 The ROM was replaced without license (printer kit software key not set).ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Set the printer kit SW key to 'Enabled'.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe...