Articles

033-312, 033-313, 033-315 to 033-327 Fax Fault RAPBSD-ON: BSD 20.1 Fax033-312 The fax PWB was unable to detect the power off at the ESS PWB side within the specified time.033-313 After the initialization of fax card has completed, it was detected that communication cannot be established with the fax card.033-315 USB fax class driver notifies that a fatal error has occurred.033-316 An error has occurred at the machine cont section in fax controller.033-317 An error has occurred at the fax machine section in fax controller.033-318 A fatal error has occurred at the fax image processing.033-319 Due to an error during...

016-321 Fax Module Error RAP016-321 Fax related error at booting.ProcedurePerform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):• 106R03733 106R03736 106R03735...

016-316, 317, 318, 329, 333, 334 Page Memory Error RAP016-316 The system detected that the page memory (standard) of the scanner was not installed.016-317 The system detected an error in the Page Memory (standard) of the scanner.016-318 The system detected an error in the Page Memory (option) of the scanner.016-329 Long boot diag page memory not detected fail.016-333 Long boot diag page memory broken standard fail.016-334 Long boot diag page memory broken option fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord....

016-312, 313, 314 SW Option Fail (Hybrid WaterMark) RAP016-312 When the SW optional function is being enabled, the system detected that the hybrid watermark detection H/W is not installed.016-313 The hybrid watermark detection H/W was detected but the SW option (secure watermark kit) was not enabled.016-314 The board for detecting the back (side 2) of a document is not installed. Therefore (paper security) is unavailable.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can...

016-311, 315, 319 Scanner Not Detected RAP016-311 The system detected that the scanner was not installed.016-315 An error in the I/F between the scanner and the main processor was detected.016-319 An error in the I/F between the scanner and the main unit was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the...