PL 13.29 Office Finisher LX Ejector for Xerox VersaLink C7020 C7025 C7030 C7000 Printer

Posted by Xwk Tech on

PL 13.29 Office Finisher LX Ejector (5 of 5)

PL 13.29 Office Finisher LX Ejector for Xerox C7020 C7025 C7030 C7000

Item Part Description
1 068K58823 Transport motor (MOT12-013)
2 - Tension roller assembly (Not Spared)
3 - Spring (Not Spared)
4 - Pulley (30T) (Not Spared)
5 - Pulley (41T) (Not Spared)
6 - Gear/Pulley (27T/30T) (Not Spared)
7 - Gear (Not Spared)
8 059K55081 Entrance roller
9 059K55091 Exit roller
10 - Eject belt (Not Spared) (REP 13.21)
11 006K98010 Paddle shaft assembly
12 - Cyclone paddle (P/O PL 13.29 Item 11)
13 - Paddle shaft (P/O PL 13.29 Item 11)
14 413W75959 Bearing
15 - Eject drive shaft (REF: PL 13.26 Item 28)
Note: Item 11 contains item 12-13.

**This PL 13.29 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post

← Older Post Newer Post →

Leave a comment