PL 13.25 Office Finisher LX Ejector for Xerox VersaLink C7020 C7025 C7030 C7000 Printer
Posted by Xwk Tech on
PL 13.25 Office Finisher LX Ejector (1 of 5)
Note: Item 3 contains item 32-34. Item 9 contains item 10-12. Item 15 contains item 16, 17. Item 27 contains item 28, 29.
**This PL 13.25 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
| Item | Part | Description |
| 1 | - | Eject cover assembly (Not Spared) |
| 2 | - | Eject assembly (Not Spared) |
| 3 | 031K93790 | Clamp arm assembly |
| 4 | 807E21400 | Gear (31T) |
| 5 | 059K55111 | Eject roller |
| 6 | 807E21380 | Sector gear (72T) |
| 7 | 807E21391 | Gear (18T) |
| 8 | 120E29773 | Actuator |
| 9 | 006K86731 | Set clamp shaft assembly |
| 10 | 809E79060 | Spring |
| 11 | - | Set clamp holder (P/O PL 13.25 Item 9) |
| 12 | - | Shaft (P/O PL 13.25 Item 9) |
| 13 | - | Not used |
| 14 | 809E79080 | Spring |
| 15 | 006K86741 | Guide paper shaft assembly |
| 16 | - | Guide paper shaft (P/O PL 13.25 Item 15) |
| 17 | - | Gear (20T) (P/O PL 13.25 Item 15) |
| 18 | - | Shaft (Not Spared) |
| 19 | 807E21420 | Gear (19T) |
| 20 | 807E21370 | Gear (25T) |
| 21 | 038E36490 | Guide paper (left/right) |
| 22 | 005K83720 | Clutch |
| 23 | 807E45590 | Gear (23T) |
| 24 | - | Stopper (Not Spared) |
| 25 | - | Bracket (front) (Not Spared) |
| 26 | - | Bracket (rear) (Not Spared) |
| 27 | - | Option switch assembly (Not Spared) |
| 28 | - | Bracket (P/O PL 13.25 Item 27) |
| 29 | - | Option switch (P/O PL 13.25 Item 27) |
| 30 | 413W11660 | Sleeve bearing |
| 31 | - | Bearing (Not Spared) |
| 32 | - | Clamp arm (P/O PL 13.25 Item 3) |
| 33 | - | Roll (P/O PL 13.25 Item 3) |
| 34 | - | Shaft (P/O PL 13.25 Item 3) |
| 35 | - | Spacer (Not Spared) |
| 36 | 962K60433 | Wire harness |
**This PL 13.25 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782