How to Fix 099-364 099-396 to 099-399 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?

Posted by Xwk Tech on

099-364, 099-396 to 099-399 Fuser Temperature Fault RAP

099-364 The recovery time from low temperature not ready state has become longer than the setting time.
099-396 The centre temperature does not reach the required threshold within the specified time.
099-397 The centre temperature does not reach the required threshold within the specified time.
099-398 The centre temperature reaches the required threshold faster the specified time.
099-399 The centre temperature is detected as higher than the specified level.

Procedure

Perform the following procedures as necessary:

010-327 Fusing On Time Fail RAP.
010-334, 010-335 Heat Roll NC Sensor Fail RAP.

**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

106R03741 106R03744 106R03743 106R03742
106R03757 106R03760 106R03759 106R03758
106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

106R03749 106R03752 106R03751 106R03750
106R03745 106R03748 106R03747 106R03746
106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

106R03733 106R03736 106R03735 106R03734

Drum Chip:

113R00780 113R00782

Share this post



← Older Post Newer Post →


Leave a comment