How to Fix 024-340 to 024-360 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
024-340 to 024-360 IOT-ESS Communication Fail 1 RAP
BSD-ON: BSD 3.1 PWB Communications (ESS PWB to Drive PWB)
024-340 Drive PWB sending error detected by controller (invalid parameter was used).
024-341 Drive PWB sending error detected by controller (sequence number error).
024-342 Drive PWB sending error detected by controller (packet number error).
024-343 Drive PWB sending error detected by controller (message length error).
024-345 Drive PWB sending error detected by controller (check code error).
024-346 Drive PWB sending error detected by controller (parity error detected by the IOT.
024-347 Drive PWB sending error detected by controller (framing error detected by the IOT).
024-348 Drive PWB sending error detected by controller (overrun error detected by the IOT).
024-349 Drive PWB sending error detected by controller (receive abort detected by the IOT after the header had been recognized).
024-350 Drive PWB receiving error detected by controller (sequence number of the received message packet is incorrect).
024-351 Drive PWB receiving error detected by controller (packet number error).
024-352 Drive PWB receiving error detected by controller (message length error).
024-353 Drive PWB receiving error detected by controller (check code error).
024-354 Drive PWB receiving error detected by controller (parity error detected by the UART).
024-355 Drive PWB receiving error detected by controller (framing error detected by the UART).
024-356 Drive PWB receiving overrun error detected by controller (overrun error detected by the UART).
024-357 Drive PWB receiving error detected by controller (receiving abort detected after the header had been recognized).
024-358 Print sequence error detected by controller (paper feed and paper output that are not applicable to the number detected.)
024-359 Drive PWB transmission receiving error detected by controller (invalid parameter used).
024-360 Initialization error between IOT and ESS.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.
3. Reload the software, GP 4.
4. Perform the OF2 Special Boot Modes RAP.
5. If the fault persists, install new components as necessary:
• Drive PWB, PL 1.10 Item 4.
• ESS PWB, PL 3.10 Item 6.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
BSD-ON: BSD 3.1 PWB Communications (ESS PWB to Drive PWB)
024-340 Drive PWB sending error detected by controller (invalid parameter was used).
024-341 Drive PWB sending error detected by controller (sequence number error).
024-342 Drive PWB sending error detected by controller (packet number error).
024-343 Drive PWB sending error detected by controller (message length error).
024-345 Drive PWB sending error detected by controller (check code error).
024-346 Drive PWB sending error detected by controller (parity error detected by the IOT.
024-347 Drive PWB sending error detected by controller (framing error detected by the IOT).
024-348 Drive PWB sending error detected by controller (overrun error detected by the IOT).
024-349 Drive PWB sending error detected by controller (receive abort detected by the IOT after the header had been recognized).
024-350 Drive PWB receiving error detected by controller (sequence number of the received message packet is incorrect).
024-351 Drive PWB receiving error detected by controller (packet number error).
024-352 Drive PWB receiving error detected by controller (message length error).
024-353 Drive PWB receiving error detected by controller (check code error).
024-354 Drive PWB receiving error detected by controller (parity error detected by the UART).
024-355 Drive PWB receiving error detected by controller (framing error detected by the UART).
024-356 Drive PWB receiving overrun error detected by controller (overrun error detected by the UART).
024-357 Drive PWB receiving error detected by controller (receiving abort detected after the header had been recognized).
024-358 Print sequence error detected by controller (paper feed and paper output that are not applicable to the number detected.)
024-359 Drive PWB transmission receiving error detected by controller (invalid parameter used).
024-360 Initialization error between IOT and ESS.
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.
3. Reload the software, GP 4.
4. Perform the OF2 Special Boot Modes RAP.
5. If the fault persists, install new components as necessary:
• Drive PWB, PL 1.10 Item 4.
• ESS PWB, PL 3.10 Item 6.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782