How to Fix 016-220 016-226 016-240 Error Code for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
016-220 to 016-226, 240 S2X Error RAP
016-220 A unrecoverable error was detected at the S2X PWB.
016-221 Communication with the S2X PWB has failed.
016-222 An error has occurred in the S2X PWB self-diagnostics.
016-223 The S2X PWB has failed the write/read test of the internal SDRAM.
016-224 The S2X PWB has failed to access to the internal PCI space.
016-225 The S2X PWB failed the ROM check sum test.
016-226 The S2X PWB failed to detect the video clocks sent from the IIT.
016-227 The S2X PWB failed the write/read test of the internal DDR memory.
016-228 The S2X PWB failed the desired value comparison of the high-compression process results using the internal test patterns.
016-240 The high compression PDF board (S2X) failed the NVM checksum
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Reload the software, GP 4.
3. If the fault persists, install a new ESS PWB, PL 3.10 Item 6.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
016-220 A unrecoverable error was detected at the S2X PWB.
016-221 Communication with the S2X PWB has failed.
016-222 An error has occurred in the S2X PWB self-diagnostics.
016-223 The S2X PWB has failed the write/read test of the internal SDRAM.
016-224 The S2X PWB has failed to access to the internal PCI space.
016-225 The S2X PWB failed the ROM check sum test.
016-226 The S2X PWB failed to detect the video clocks sent from the IIT.
016-227 The S2X PWB failed the write/read test of the internal DDR memory.
016-228 The S2X PWB failed the desired value comparison of the high-compression process results using the internal test patterns.
016-240 The high compression PDF board (S2X) failed the NVM checksum
Procedure
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Reload the software, GP 4.
3. If the fault persists, install a new ESS PWB, PL 3.10 Item 6.
**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782