GP 8 How to Check a Solenoid or Clutch for Xerox VersaLink C7020 C7025 C7030 C7000 Printer?
Posted by Xwk Tech on
Purpose
Use this procedure to check a clutch or solenoid.
Initial Actions
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
1. For a clutch, check that the mechanical components are clean, free to move and are lubricated correctly.
2. For a solenoid, check that the armature and associated mechanical components are free to move.
Procedure
NOTE: The voltages, PJ numbers, pin numbers and PWB names shown are an example only.
NOTE: When a solenoid is energized in diagnostics, armature movement is seen. When a clutch is energized in diagnostics, the sound of the clutch action is heard. If possible, energize the motor connected to the clutch to confirm when the clutch is energized.
• Check that the signal changes on the ESS PWB (Flag 1) when the component control code for the clutch or solenoid is entered.
• Disconnect PJC (Flag 2). Check that +24V is measured when the component control code for the clutch or solenoid is entered.
• Disconnect PJD (Flag 3). Check for +24V on the LVPS.
• Check the wiring and the connectors for the clutch or solenoid circuit.
**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
Use this procedure to check a clutch or solenoid.
Initial Actions
WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.
1. For a clutch, check that the mechanical components are clean, free to move and are lubricated correctly.
2. For a solenoid, check that the armature and associated mechanical components are free to move.
Procedure
NOTE: The voltages, PJ numbers, pin numbers and PWB names shown are an example only.
NOTE: When a solenoid is energized in diagnostics, armature movement is seen. When a clutch is energized in diagnostics, the sound of the clutch action is heard. If possible, energize the motor connected to the clutch to confirm when the clutch is energized.
• Check that the signal changes on the ESS PWB (Flag 1) when the component control code for the clutch or solenoid is entered.
• Disconnect PJC (Flag 2). Check that +24V is measured when the component control code for the clutch or solenoid is entered.
• Disconnect PJD (Flag 3). Check for +24V on the LVPS.
• Check the wiring and the connectors for the clutch or solenoid circuit.
Figure 1 Wiring diagram
**This procedure is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**
You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.
Toner Chip (For North America and West Europe Region):
• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738
Toner Chip (For South America and East Europe Region):
• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766
Toner Chip (For Metered Machine):
• 106R03733 106R03736 106R03735 106R03734
Drum Chip:
• 113R00780 113R00782
C 2260. ERROR CODE / 043-343
Thank you I will try and update back here 🙏🏾