Articles

073-101, 073-900 Tray 3 Misfeed RAPBSD-ON: BSD 7.11 Tray 3 Paper Stacking (3TM)BSD-ON: BSD 8.4 Tray Module Paper Transportation (3TM)BSD-ON: BSD 7.20 Tray 3 Paper Stacking (TTM)BSD-ON: BSD 8.9 Tray Module Paper Transportation (TTM) (1 of 2)073-101 Paper does not actuate the tray 3 feed out sensor within the specified time after tray 2 feed start.073-900 The tray 3 feed out sensor detected remaining paper.Initial ActionsCheck the condition of the paper in tray 3. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need...

072-105 Registration Sensor Jam (Tray 2) RAPBSD-ON: BSD 8.5 Registration072-105 The registration sensor did not actuate within the specified time after the registration clutch initialized during paper feed from tray 2.Initial ActionsCheck the condition of the paper in tray 2. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check a Motor.•...

072-101, 072-900 Tray 2 Misfeed RAPBSD-ON: BSD 8.2 Tray Module Paper Transportation (STM)BSD-ON: BSD 8.3 Tray Module Paper Transportation (1TM)BSD-ON: BSD 8.4 Tray Module Paper Transportation (3TM)BSD-ON: BSD 8.9 Tray Module Paper Transportation (TTM) (1 of 2)072-101 Paper does not actuate the tray 2 feed out sensor within the specified time after tray 2 feed start.072-900 The tray 2 feed out sensor detected remaining paper.Initial ActionsCheck the condition of the paper in tray 2. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need...

071-105 Registration Sensor Jam (Tray 1) RAPBSD-ON: BSD 7.7 Tray 1 Paper StackingBSD-ON: BSD 8.5 Registration071-105 The registration sensor did not actuate within the specified time after the registration clutch initialized during paper feed from tray 1.Initial ActionsCheck the condition of the paper in tray 1. Refer to GP 15 Paper and Media Size Specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP...

071-100 Tray 1 Misfeed RAPBSD-ON: BSD 7.7 Tray 1 Paper StackingBSD-ON: BSD 8.1 Tray 1 and Bypass Tray Paper Transportation071-100 Paper does not actuate the tray 1 feed out sensor within the specified time after tray 1 feed start.Initial Actions• Check the condition of the paper in tray 1. Refer to GP 15 Paper and Media Size Specifications.• Check that the tray 1 paper guides are set correctly.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury....