Articles

003-764 Insufficient Documents RAP003-764 Insufficient documents for image overlay.ProcedurePerform the steps that follow:1. Advise the customer to cancel the job.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765...

003-760, 003-761, 003-763 Scan Settings Error RAP003-760 The job properties are incorrect.003-761 Tray selection error.003-763 The adjustment chart patch could not be detected.ProcedurePerform the steps that follow:1. Advise the customer to correct the job properties.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For...

003-757, 003-931, 003-934 400dpi Cannot be Scanned RAP003-757 400/600dpi unavailable for DADF mixed 2-sided mode scan.003-931 For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available.003-934 For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available (when the next document exists).ProcedurePerform the steps that follow:1. Advise the customer to perform scanning below 300 dpi resolution or perform scanning in other than mixed mode.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested...

003-754 003-755 003-756 S2X Error RAP003-754 A recoverable error was detected.003-755 Command error returned from the PWB.003-756 All scanned documents were detected as blank.ProcedurePerform the steps that follow:1. Advise the customer to cancel the job, then retry the job.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740...

003-753, 003-930, 003- 933 300dpi Cannot be Scanned RAP003-753 300/400/600dpi unavailable for DADF mixed 2-sided mode scan.003-930 For scanning in the DADF mix duplex mode, 300dpi, 400dpi and 600dpi are not available.003-933 For scanning in the DADF mix duplex mode, 300dpi, 400dpi and 600dpi are not available (when the next document exists).ProcedurePerform the steps that follow:1. Advise the customer to perform scanning below 200 dpi resolution or perform scanning in other than mixed mode.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be...