Articles

024-367 Decompress Other Fail RAPBSD-ON: BSD 3.9 ESS024-367 Incorrect line synchronization was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure the connectors on the hard disk are securely connected.3. Format the hard disk drive, refer to dC355 Hard Disk Diagnostics.4. Reload the software, GP 4.5. Perform the OF2 Special Boot Modes RAP.6. If the fault persists,...

024-366 JBIG Library Other Fail RAP024-366 Other errors in JBIG Lib.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. If the fault persists, install a new ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip...

024-365 Overflow on Loop Back Write RAP024-365 Loop back write overflow.ProcedureThis fault is currently not displayed. No service action necessary.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):• 106R03733 106R03736...

024-364 DMA Transfer Fail RAP024-364 DMA transfer error. Reduction/enlargement was not completed even though the specified data was entered.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure the connectors on the hard disk are securely connected.3. Remove, then re-install the SD card, PL 3.10 Item 11. If necessary, install a new memory card.4. Format the hard disk...

024-362, 024-363 Page Sync Illegal Start or Stop RAPBSD-ON: BSD 3.1 PWB Communications (ESS PWB to Drive PWB)024-362 Page-sync occurred before video output preparation completes.024-363 Page-sync completion error during video output.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item...