Articles

041-334 Drive PWB F11 Blown RAPBSD-ON: BSD 1.5 DC Power Generation (2 of 2)BSD-ON: BSD 1.7 Option DC Power Distribution041-334 Drive PWB fuse 11 open circuit was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Check the finisher for overcurrent and overvoltage. Repair the wiring or install new components as necessary.2. After the faulty circuit has been repaired, install a new drive PWB, PL 1.10 Item...

041-333 Drive PWB F10 Blown RAPBSD-ON: BSD 1.5 DC Power Generation (2 of 2)BSD-ON: BSD 1.7 Option DC Power Distribution041-333 Drive PWB fuse 10 open circuit was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Check the tray module for overcurrent and overvoltage. Repair the wiring or install new components as necessary.2. After the faulty circuit has been repaired, install a new drive PWB, PL 1.10...

041-310 IM Logic Fail RAPBSD-ON: BSD 3.1 PWB Communications (ESS PWB to Drive PWB)041-310 IM software control error detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Reload the software, GP 4.3. If the fault persists, install new components as necessary:• Drive PWB, PL 1.10 Item 3.• ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service...

033-733, 735, 741, 742, 743, 744, 745, 746, 750 Fax Document Number Error RAP033-733 The number of job documents related to the job could not be obtained.033-735 Fax receive - buffer allocate timeout.033-741 When transferring image data to the fax card, the conditions for sending the response to the fax card did not match.033-742 When transferring image data to the fax card, the conditions for sending the response to the fax card did not match.033-743 When receiving image data from the fax card, the conditions for sending the response to the fax card did not match.033-744 When receiving image data...

033-731, 732, 736, 740, 747, 748, 749 Inconsistent Instructions RAP033-731 Transmission closed due to start transmission from fax card and stop transmission from controller.033-732 Print job received was cancelled at forced polling.033-736 The data amount for fax transfer exceeded the threshold during fax transfer of internet fax off ramp.033-740 The user cancelled immediate printing upon receiving.033-747 When requesting to start the service from the fax card, the job could not be generated due to causes such as job number overflow.033-748 During service sequencing, an illegal operation was detected.033-749 During fax formatting, the extended image data is larger than the memory...