Articles

093-912 Black Toner Cartridge Empty RAP093-912 The black toner cartridge is empty.ProcedureInstall a new toner cartridge, PL 90.05 Item 13. Or prepare a new cartridge CRUM (toner chip) listed as below to refill the cartridge.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745...

092-312 to 315, 092-657 to 660, 092-665 to 668 ATC Sensor Fault RAPBSD-ON: BSD 9.5 Development (2 of 2)092-312 Toner density in the developer unit as detected by the yellow ATC sensor abnormal. This fault occurs when the difference between the maximum and minimum values in the ATC sensor measurement set is lower than the threshold value.092-313 Toner density in the developer unit as detected by the magenta ATC sensor abnormal. This fault occurs when the difference between the maximum and minimum values in the ATC sensor measurement set is lower than the threshold value.092-314 Toner density in the developer...

OF1 POST Error RAPUse this RAP when the UI has stalled and shows the splash-logo screen, or the system appears to have power but the UI is blank.• Power on Self Test (POST) occurs each time the machine is powered on. POST verifies the functionality of key subsystems.• POST begins when power is switched on before higher level machine functions (such as the user interface) are operational.• POST is performed by the ESS PWB.• The fault is communicated via an eight LED display on the ESS PWB. This is to help diagnose common faults which prevent the machine from powering...

092-651 RC Sample Block Fail-B RAPBSD-ON: BSD 9.9 ADC and Environment Sensing, BSD 9.4 Development (1 of 2).092-651 An abnormal read value of the IBT sensor was detected.Initial ActionsPower off then power on the machine, GP 10.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedure that follows as necessary:• GP 7 How to Check a Sensor.1. Check the wiring between the drive PWB and the applicable MOB ADC...

092-606 ADC Sensor Contamination Fail RAPBSD-ON: BSD 9.9 ADC and Environment Sensing.092-606 Contamination on the ADC sensor was detected.ProcedurePerform the 089-601, 089-603 RC Sample Block Fail-A1 RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767...