Articles

003-974 Next Original Specification RAP003-974 Next document specified. Scanning has been completed for all loaded documents.ProcedurePerform the steps that follow:1. Ask the customer to verify that scanning is complete or if other documents should be loaded.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip...

003-973 Image Rotation RAP003-973 The document and the image are different in orientation (except when poster is specified). When rotation is not available even though the orientation of the document and the image are different and part of the image will be lost if it is not rotated.ProcedurePerform the steps that follow:1. Advise the customer to verify the image loss and use a larger paper size if available. Or use reduction to make a smaller document, then retry the job.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks...

003-972 Maximum Stored Page RAP003-972 When scanning a document, the number of pages that has accumulated in the machine has exceeded the value of Maximum Stored Number of Copy Sheets' set in system data.ProcedurePerform the steps that follow:1. Advise the customer to set the number of pages of the document to be within the maximum number of pages that can be stored.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox...

003-971 Copy Prevention Code RAP003-971 Copy restriction codes detected in document to be copied.ProcedureFor information only, no service action necessary.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):• 106R03733 106R03736...

003-970, 003-976 Fax Line Memory RAP003-970 The number of slow-scan lines has exceeded the upper limit due to Fax parallel composition, long- document enlargement, etc.003-976 Number of lines in the slow scan direction exceeded during Fax N-up.ProcedurePerform the steps that follow:1. Advise the customer to press the continue button to store as much data as the memory capacity, then continue scanning the next document. Otherwise, cancel the job.2. Switch off, then switch on the machine, GP 10.3. Ensure the memory SD card, PL 3.10 Item 11 is installed.4. If the fault persists, reload the software, GP 4.**This RAP is from...