Articles

005-500 Write to DADF-ROM Error RAP005-500 An error was detected while writing data to the DADF-ROM.ProcedureResubmit the job.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):• 106R03733 106R03736 106R03735 106R03734Drum...

005-305 DADF Feeder Cover Interlock Open RAPBSD-ON: BSD 5.1 DADF Interlock and Document Setting005-305 The DADF feeder cover was opened during DADF operation.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedure that follows as necessary:• GP 7 How to Check a Sensor.Perform the steps that follow:1. Check the actuator on the upper feeder assembly, PL 5.10 Item 10. If the actuator is damaged, install a new upper feeder...

005-288 Home Position Sensor Fail RAPBSD-ON: BSD 5.6 Document Scan, Invert and Exit Transportation005-288 The invert mechanism failed to return to the home position.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 7 How to Check a Sensor.• GP 8 How to Check a Solenoid or Clutch.Perform the steps that follow:1. Check the operation of the driven link between the cams.2. Enter dC330,...

005-275, 005-280 DADF RAM or EEPROM Write Fail RAPBSD-ON: BSD 3.5 PWB Communications (ESS PWB to DADF)005-275 RAM failure on the DADF PWB was detected at power on.005-280 Write failure to the DADF EEPROM or communication failure with EEPROM was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can causedeath or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. If the problem persists, install a new DADF PWB, PL...

005-210 DADF Download Fail RAPBSD-ON: BSD 3.5 PWB Communications (ESS PWB to DADF)005-210 When the IISS starts up (including at power on and sleep recovery), it was detected that the DADF is in download mode. There was an error in DADF download, the ROM is corrupted.ProcedureReload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758•...