Articles

012-291B Stapler Fail RAPBSD-ON: BSD 13.12 Office Finisher LX Staple ControlInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-291 Stapler Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Check the stapler for jammed staples or an incorrectly installed staple cartridge.Procedure1. Enter dC330 code 012-046 then 012-047. The stapler cycles. If YES, go to 3. If NO, go to 2.2. Check the wiring between J8887 pins 1...

012-291A Stapler Fail RAPBSD-ON: BSD 12.5 Integrated Office Finisher Staple ControlInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-291 Stapler Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check that the staple assembly and cartridge are correctly installed, not broken and include no foreign objects.• Switch off, then switch on the machine, GP 10.Procedure1. Enter dC330 012-046 and 012-047 alternately. The staple motor runs. If...

012-291 Stapler Fail Entry RAP012-291 Within a specified time after the staple motor started rotating in reverse direction, the staple head home sensor was not detected turning on.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-291A Stapler Fail RAP.• Office finisher LX installed, 012-291B Stapler Fail RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740...

012-283B, 012-284B Set Clamp Home Sensor Fail RAPBSD-ON: BSD 13.13 Office Finisher LX Eject Control (1 of 2)BSD-ON: BSD 13.14 Office Finisher LX Eject Control (2 of 2)Initial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-283, 012-284 Set Clamp Home Sensor Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Manually operate the eject mechanism. Check for binding, a dirty sensor, or damage.• Check the actuator...

012-283A, 012-284A Set Clamp Home Sensor Fail RAPBSD-ON: BSD 12.7 Integrated Office Finisher Set Eject (2 of 2)Initial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-283, 012-284 Set Clamp Home Sensor Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the set clamp home sensor, PL 12.11 Item 7 is correctly installed and has no foreign object and that the actuator is not broken.• Switch...