Articles

016-368, 016-369, 016-370 Controller Diagnostic Fail RAP016-368 Cont torino diagnostic fail.016-369 Cont S2X board diagnostic fail.016-370 Cont rendering engine diagnosed as having a failure.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.3. Reload the software,...

016-366, 016-367 Controller HDD Fail RAPBSD-ON: BSD 3.9 ESS016-366 Cont HDD diagnostic fail 1.016-367 Cont HDD diagnostic fail 2.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the hard disk.3. Reload the software, GP 4.4. Install new components as necessary:• ESS PWB,PL 3.10 Item 6.• HDD,...

016-364, 016-365 Controller USB 2.0 Fail RAP016-364 Cont USB 2.0 host diagnostic fail.016-365 Cont USB 2.0 device diagnostic fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.3. Reload the software, GP 4.4. If the fault...

016-363 Controller LyraCard Fail RAP016-363 Cont JPEG card diagnosed as having a failure.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.3. Reload the software, GP 4.4. If the fault persists, install a new ESS PWB,...

016-360, 016-362 Controller UI Fail RAP016-360 Cont UI diagnostic fail 1.016-362 Cont UI diagnostic fail 2.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Check the wiring between the ESS PWB and the UI3. Install new components as necessary:• ESS PWB, PL 3.10 Item 6.• UI assembly, PL 2.05 Item 7.• UI assembly (C7000), PL 2.10 Item 1.**This...