Articles

016-606, 016-608 Controller Connection Fail RAP016-606 Cont-BP cable connection fail.016-608 Cont-Drive PWB cable connection fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.3. Reload...

016-604 Debug Log Created RAP016-604 Debug log auto creation by system.ProcedureSwitch off, then switch on the machine, GP 10.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746• 106R03765 106R03768 106R03767 106R03766Toner Chip (For Metered Machine):• 106R03733 106R03736 106R03735...

016-601 Illegal Access Detection RAP016-601 The number of incorrect authentication log in attempts reached the limit.ProcedureIf required, refer to GP 19 to reset password to 1111 (default) if the System Administrator ID is unavailable.NOTE: Default is 10 users. NVM value 700-564 can be set between 1 to 600 users.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737...

016-600 KO Authentication Locked RAP016-600 The number of incorrect Key Operator log in attempts reached the limit.ProcedureIf required, refer to GP 19 to reset password to 1111 (default) if the System Administrator ID is unavailable.NOTE: Default is 5 events. NVM value 700-563 can be set between 1 to 10 events. With this feature enabled, the machine denies access when an incorrect System Administrator ID is entered the selected number of times.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox...

016-598, 016-599 Email Message Size RAP016-598 Email message size is over spec.016-599 Email message size is over spec.ProcedureAdvise the customer to:1. Reduce a resolution send parameter (image-to-send quality) then resend the job.2. Reduce a magnification send parameter, then resend the job.3. Increase the maximum message size (10MB recommended default).**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737...