Articles

018-440 WiFi Direct Setting IPv6 Conflict RAP018-440 When activating the Wi-Fi Direct of this machine, the setting for the IPv6 mode is detected in the conflict configuration information related to the IP protocol stack.ProcedureAdvise the customer to request their network administrator to change the setting for the configuration information related to the IP protocol stack to Dual or the IPv4 mode.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and...

018-439 WiFi Direct Setting Conflict RAP018-439 When activating the Wi-Fi Direct, the conflict setting for Wi-Fi Network Type Ad-hoc is detected.ProcedureAdvise the customer to request their network administrator to change the setting for the Wi-Fi network type to Infrastructure.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe...

018-429 to 018-436 Duplicate IP Address IPv4 (WiFi) RAP018-429 There is an IP address conflict with another system on the network (WIFI).018-430 There is an IP address conflict with another system on the network (WIFI direct).018-431 There is an IP address conflict with another system on the network (WIFI).018-432 There is an IP address conflict with another system on the network (WIFI).018-433 There is an IP address conflict with another system on the network (WIFI).018-434 There is an IP address conflict with another system on the network (WIFI).018-435 There is an IP address conflict with another system on the network...

018-428 WLAN Module Connection Failure RAP018-428 There is a connection failure between the WIFI module and the ESS PWBA.ProcedurePerform the steps that follow:1. Switch off the machine, GP 10. Remove, then install the WIFI module. Switch on the machine, GP 10.2. If the fault persists, install new components as necessary:• WiFi dongle, PL 3.10 Item 10.• ESS PWB, PL 3.10 Item 6.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America...

018-427 Duplicate IP Address Range WiFi and WiFi Direct RAP018-427 A duplicate range setting was detected in the machine's Wi-Fi IP addresses and Wi-Fi Direct IP addresses.ProcedurePerform the following1. Change the IP address of the machine's Wi-Fi Direct DHCP server to be outside the duplicate range of the IP addresses set for Wi-Fi.2. If the fault persists modify the printer's Wifi Direct IP address to be outside the guest's DHCP range.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox...