Articles

026-724, 026-725 Remote Download File Error RAP026-724 The size of the remote download file reported from the EP center is different from that of the actual downloaded file.026-725 The checksum of the remote download file reported from the EP center does not match that of the downloaded file.ProcedureAdvise the customer that it is necessary to check the size of the file registered with the EP center and the size stored in the SW repository.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip...

026-720 to 026-723 Media Error RAP026-720 The media does not have enough space available.026-721 An attempt to access media has failed.026-722 The media is not formatted.026-723 An attempt to access media has failed.ProcedureAdvise the customer to:1. Check that the media exists where scanned documents will be sent.2. Check that the PC can access the media where scanned documents will be sent.3. Check that a file can be created in a specified storage.4. Check that the media is neither removed nor reinserted while being referred to or that during that time, other media is not inserted.**This RAP is from Xerox Service...

026-719 Internal Error in Scan RAP026-719 An internal error has occurred.ProcedurePerform the steps that follow:1. Advise the customer to retry the same operation.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748...

026-718 PS Print Instruction Fail RAP026-718 An erroneous combination of print parameters selected (finishing, paper size, paper tray, Duplex instructions, output tray) prevents the machine from running the job.ProcedurePerform the steps that follow:1. Advise the customer to correctly set finishing, paper size, paper tray, duplex instructions, and output tray options, then re-run the job.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North...

026-712 HTTP Out Job Overlap Error RAP026-712 The high compression/OCR processing module has detected that a job that specifies high compression/OCR processing and is to be taken out using HTTP has started while another job to be sent via the network is undergoing high compression/OCR processing.ProcedureFor information only, no service action necessary. Advise the customer that as a job specifying high compression/OCR processing is in progress, wait until the job is complete before running another job.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and...