PL 80.61 HCF Feeder for Xerox VersaLink C7020 C7025 C7030 C7000 Printer

PL 80.61 HCF Feeder (2 of 3)

Item	Part	Description
1	-	Upper feeder assembly (P/O PL 70.45 Item 11)
2	003E59570	Latch
3	-	Shaft latch (P/O PL 80.61 Item 1)
4	006K23124	Feed shaft assembly (REP 80.23, REP 80.25)
5	-	Feed shaft (P/O PL 80.61 Item 4)
6	413W66250	Ball bearing
7	-	Gear 20T (P/O PL 80.61 Item 4)
8	007E78180	Feed gear 25T
9	-	Lever (P/O PL 80.61 Item 1)
10	-	Bearing (P/O PL 80.61 Item 1)
11	-	Spacer (P/O PL 80.61 Item 1)
12	-	Pin drive (P/O PL 80.61 Item 1)
13	-	Guide (P/O PL 80.61 Item 1)
14	-	Rear upper chute (P/O PL 80.61 Item 1)
15	-	Upper chute (P/O PL 80.61 Item 1)
16	120E21900	Actuator
17	-	Upper frame (P/O PL 80.61 Item 1)
18	-	Spring (P/O PL 80.61 Item 1)
19	930W00112	HCF no paper sensor (Q78-200)/HCF level sensor (78-201)
20	-	HCF Pre feed sensor (Q78-100) (P/O PL 80.61 Item 1)
21	-	Wire harness (P/O PL 80.61 Item 1)
22	-	Feed roll (P/O PL 80.61 Item 24)
23	-	Nudger roll (P/O PL 80.61 Item 24)
24	604K23660	Feed roller kit (REP 80.22)

Note: Item 1 contains item 2-21. Item 4 contains item 5-7. Item 24 contains item 22, 23, PL 80.62 item 2.

**This PL 80.61 is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**

You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.

Toner Chip (For North America and West Europe Region):

• 106R03741 106R03744 106R03743 106R03742
• 106R03757 106R03760 106R03759 106R03758
• 106R03737 106R03740 106R03739 106R03738

Toner Chip (For South America and East Europe Region):

• 106R03749 106R03752 106R03751 106R03750
• 106R03745 106R03748 106R03747 106R03746
• 106R03765 106R03768 106R03767 106R03766

Toner Chip (For Metered Machine):

• 106R03733 106R03736 106R03735 106R03734

Drum Chip:

• 113R00780 113R00782