Articles

099-364, 099-396 to 099-399 Fuser Temperature Fault RAP099-364 The recovery time from low temperature not ready state has become longer than the setting time.099-396 The centre temperature does not reach the required threshold within the specified time.099-397 The centre temperature does not reach the required threshold within the specified time.099-398 The centre temperature reaches the required threshold faster the specified time.099-399 The centre temperature is detected as higher than the specified level.ProcedurePerform the following procedures as necessary:• 010-327 Fusing On Time Fail RAP.• 010-334, 010-335 Heat Roll NC Sensor Fail RAP.**This RAP is from Xerox Service Manual. All brand names...

094-420, 094-422 IBT Belt Unit / 2nd BTR Roll End of Life RAP094-420 IBT end of life.094-422 2nd BTR unit end of life.ProcedureInstall new components as necessary:• IBT Belt unit, PL 90.40 Item 3.• 2nd BTR roll, PL 90.40 Item 5.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and...

094-414, 094-417, 094-419 IBT / 2nd BTR Near End of Life RAP094-414 IBT is near end of life.094-417 IBT is near end of life.094-419 2nd BTR unit is near end of life.ProcedureInformation only. No service action necessary. Advise the customer that the IBT or 2nd BTR unit is almost at end of life.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757...

093-926, 960, 961, 962 Toner CRUM Data Mismatch RAPBSD-ON: BSD 9.6 Toner Cartridge Life Control (Y, M), BSD 9.7 Toner Cartridge Life Control (C, K).093-926 Invalid authentication area data of black toner cartridge CRUM detected.093-960 Invalid authentication area data of yellow toner cartridge CRUM detected.093-961 Invalid authentication area data of magenta toner cartridge CRUM detected.093-962 Invalid authentication area data of cyan toner cartridge CRUM detected.ProcedurePerform the steps that follow:1. Remove, then reinstall the toner cartridge.2. If the fault persists, replace a new toner cartridge CRUM (toner chip) listed as below or install a new Xerox toner cartridge:• Black toner cartridge, PL...

093-414, 415, 416, 417 Developer Near End of Life RAP093-414 The black developer unit is near end of life.093-415 The yellow developer unit is near end of life.093-416 The magenta developer unit is near end of life.093-417 The cyan developer unit is near end of life.ProcedureFor information only. No service action necessary. Advise the customer that the indicated developer unit is almost at end of life.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner...