Articles

116-319 Controller and UI Configuration RAPBSD-ON: BSD 2.1 Control Panel116-319 A mismatch between the installed ROM and UI.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the UI assembly, PL 2.05 Item 7 or PL 2.10 Item 1, and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted...

116-314 Ethernet Address Fail RAP116-314 An Ethernet error was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to check that the TCP/IP ports are correctly configured.2. Switch off, then switch on the machine, GP 10.3. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules...

116-312, 116-313 HDD Encrypt Key Fail RAP116-312 An error in the encryption key was detected on booting.116-313 An encryption setting error was detected on booting.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Initialise the hard disk, refer to dC355 Image Disk Diagnostics.2. When the system has been recovered, advise the customer to set a correct HDD encryption key.**This RAP is from Xerox Service Manual. All brand...

116-212, 116-220, 116-310 to 116-311 ESS Error RAP116-212 MediaLib internal logic error has occurred.116-220 The downloader software that processes downloads within the ESS failed to initialize during transition into download mode.116-310 An error was detected when the ESS font ROM DIMM #2 was checked.116-311 A fail is detected during a check of ESS font ROM DIMM #3.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off,...

116-210, 116-211 Media Reader Error RAP116-210 Fatal error of reader.116-211 Connection cable disconnected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are securely connected.3. Reload the software,...