Articles

016-513 SMTP Server Reception Error RAP016-513 Error when receiving response from the SMTP server (after connecting to the server).ProcedurePerform the steps that follow:1. Advise the customer to wait 5 minutes before resubmitting the job.2. Check that SMTP send port number is correct.3. Check the SSL/TLS settings and Port number:On the embedded web server, under Connectivity, SMTP, Connection Security. Ensure that the customer is using the appropriate encryption type for their mail server.4. If the fault persists, advise the customer to consult with their network administrator for thecorrect configuration.**This RAP is from Xerox Service Manual. All brand names and trademarks are...

016-511, 016-512 Image Log Invalid Send Rule RAP016-511 Rules for log image transfer are illegal, causing a job to be discontinued.016-512 Rules for log image transfer are illegal.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to overwrite rules for transfer from the destination image log control server to the device.2. Check the wiring between the ESS PWB, PL 3.10 Item 6 and the...

016-509, 016-510 Image Log No Send Rule RAP016-509 Because rules for log image transfer are not registered, a job cannot be continued.016-510 Rules for log image transfer are not registered.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Advise the customer to register rules for transfer from the destination image log control server to the device.2. Check the wiring between the ESS PWB, PL 3.10 Item 6...

016-507, 016-508 Image Log Send Fail RAP016-507 A log image transfer fails, making it impossible to continue a target job which will consist of created images.016-508 A log image transfer fails, making it impossible to continue an image transfer job.ProcedurePerform the steps that follow:1. Advise the customer to check the state of the destination image log control server and that of the network. Clear any factor preventing image logs from being transferred to the image log control server.2. Initialise the hard disk. Refer to dC355 Image Disk Diagnostics.3. If the fault persists, install a new hard disk, PL 3.10 Item...

016-505 POP Authentication Fail for Redirector RAP016-505 Incorrect POP Server authentication information was detected.ProcedurePerform the steps that follow:1. Advise the customer to specify the correct POP Server authentication information.2. If the fault persists, perform the 016A Scan to Network Error Entry RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America...