Articles

033-535 DCN Receive at Phase B Send RAP033-535 Phase B instruction command (DCS/NSS/NSC/DTC) was rejected at the DCN.ProcedurePerform the steps that follow:1. Advise the customer to check the recipient’s address, folder information, etc. then repeat the operation.2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759...

033-531, 532, 533, 544, 552, 578 Remote Machine Error 2 RAP033-531 A reject command signal was received.033-532 An illegal command was received.033-533 An error has occurred at the T.30 protocol.033-544 Busy tone was detected.033-552 When receiving G3 image data, the detected total number of error lines exceeded the threshold value indicated in the system data.033-578 The frame size of received command exceeded the specification value.ProcedurePerform the steps that follow:1. Advise the customer to request for the sender to check the remote machine for an error, then re-send.2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault...

033-530 DTMF Illegal Procedure RAP033-530 An invalid procedure signal was received.ProcedurePerform the steps that follow:1. Advise the customer that there may be a mistake in how the operator is performing the DTMF procedure.2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739...

033-523, 524, 525, 542, 546, 574 Line Not Connected RAP033-523 Channel 1 not connected.033-524 Channel 2 not connected.033-525 Channel 3 not connected.033-542 The process was requested for uninstalled channel.033-546 The dial tone could not be detected.033-574 An instruction was issued to a channel that is not installed.ProcedurePerform the steps that follow:1. Ensure the relevant telephone cable is connected correctly.2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM)...

033-514, 516, 517, 521, 522, 033-526 to 033-529 Remote Machine Error 1 RAP033-514 Carrier broken.033-516 EOR-Q was received.033-517 Timeout has occurred between the ECM frames.033-521 The system sent a reject command signal and stopped the transmission.033-522 DTMF I/F timed out. Correct operation was not performed within the specified time.033-526 An ECM error has occurred.033-527 EOR-Q was sent.033-528 RTN was sent.033-529 RTN was received.ProcedurePerform the steps that follow:1. Advise the customer to request for the sender to check the remote machine for an error, then re-send.2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.**This RAP...