Articles

116-386 Fax USB Port RAP116-386 At startup, the fax USB cable was connected to an incorrect port.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that the fax USB cable is connected to the correct USB port.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested...

116-384, 385, 387, 389 DCS/IDC Software Fail RAP116-384 DCS-related fatal error. Due to an error in software processing, subsequent processes cannot be performed.116-385 Fatal error related to IDC. Due to an error in software processing, subsequent processes cannot be performed.116-387 A fatal error has occurred during the usage of high compression board.116-389 The necessary additional RAM was not installed.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1....

116-383 PIT Lib Failure RAP116-383 Board Fault/non-installation, or HDD access error.ProcedurePerform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Check dC125 Faults. If a new fault is listed, perform the relevant RAP.3. If the fault persists, perform the 016-210, 506, 777, 780, 798 HDD Error RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759...

116-382 ABL Initialize Fail RAP116-382 ABL has failed to access the NVM or HDD.ProcedurePerform the steps that follow:1. Enter dC131. Set NVM value 790-664 to 0.2. Reload the software, GP 4.3. If the fault persists, perform the 016-210, 506, 777, 780, 798 HDD Error RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip...

116-381 ABL Version Fail RAP116-381 ABL did not match the ABL version information on the NVM, or corrupted data was detected.ProcedureInitialize the NVM, refer to dC301 NVM Initialization.NOTE: Inform the customer that this will clear all address information.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):•...