Articles

117-331, 117-355 Uninitialized HDD RAP117-331 An uninitialized HDD that was used for another machine was recognized.117-355 HDD is not recognized in this startup.ProcedurePerform the 016-210, 506, 777, 780, 798 HDD Error RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748...

117-330 XBDS Soft Fail RAP117-330 An Ethernet error was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Advise the customer to check whether HTTP and HTTPS have started up normally and are operable.3. Advise the customer to check that the TCP/IP ports are correctly configured.4. Ensure that all connectors on the drive PWB, PL 1.10 Item 4...

117-325, 117-326 Access Fail RAP117-325 Failed to obtain RTC timer value due to hardware problem in the contract function.117-326 Software fault processing of NVRAM area/access.ProcedureSwitch off, then switch on the machine, GP 10.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745...

117-320 to 117-323, 324, 327, 329, 338 SD Card Fail RAP117-320 When starting, the SD card hardware error was detected by SysCheckSD.117-321 When starting, the installed SD card was detected to be unsupported by SysCheckSD.117-322 When starting, SD encryption error was detected by SysCheckSD.117-323 When starting, SD card file system access error was detected by SysCheckSD.117-324 When the OS is starting up, the system detected that the SD card is meant for another product and an error is issued.117-327 Hardware fault processing of NVRAM area/access on the SD card.117-329 When starting up, the SD card was detected to be not...

117-319 SD Card Program or Font Data Access RAP117-319 SD card program or font data access fail.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure the SD card, PL 3.10 Item 11 is correctly installed. Also, ensure that the write protection switch, to the left of the SD card, is not enabled. If the installation of the...