Articles

124-310, 311, 314, 316, 318, 322, 324, 344, 380 DC132 Error RAP124-310 Product number not specified.124-311 Serial number not specified.124-314 Stored data mismatch.124-316 Stored data mismatch.124-318 Stored data mismatch.124-322 Stored data mismatch.124-324 All billing counter mismatch.124-344 All the billing meter types kept at multiple locations are different.124-380 The CRUM destinations stored in three positions match, but their values are not set (0).ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the...

123-382 to 123-399 UI Error 3 RAP123-382 UI-SW failure in the ESS PWB.123-383 UI-SW failure in the ESS PWB.123-384 UI-SW failure in the ESS PWB.123-389 UI-SW failure in the ESS PWB.123-390 UI-SW failure in the ESS PWB.123-392 UI-SW failure in the ESS PWB.123-393 UI-SW failure in the ESS PWB.123-395 UI-SW failure in the ESS PWB.123-396 UI-SW failure in the ESS PWB.123-397 UI-SW failure in the ESS PWB.123-398 UI-SW failure in the ESS PWB.123-399 UI-SW failure in the ESS PWB.ProcedurePerform the 002-500 UI Error RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You...

123-354 to 123-381 UI Error 2 RAP123-354 The control panel has detected a drop in +24V power voltage.123-355 The control panel has detected a drop in +5V power voltage.123-356 The control panel has detected that FFC is disconnected from one touch key for fax or that one touch key has a problem.123-357 The control panel has detected that writing in the EEPROM has failed.123-358 The control panel has detected that writing in the EEPROM for logging failed.123-362 UI-SW failure in the ESS PWB.123-368 There is insufficient memory or the connection failed.123-369 UI-SW failure in the ESS PWB.123-371 The parameter sent...

123-310 to 123-353 UI Error 1 RAP123-310 The data sent from the UI to the controller exceeded the upper limit for the processing capability.123-311 The data received from the controller exceeded the upper limit for the processing capability in the UI.123-312 The data received from the controller has exceeded the upper limit of the processing capability in the UI.123-325 The specified UI internal object could not be created due to a setting/specification error. UI-SW failure in the ESS PWB.123-326 The memory in the GUAM exceeded the upper limit.123-333 The H/W connection in the UI is faulty or the internal connection...

121-340 EP Accessory MisMatch RAP121-340 The combination of accessories that are installed does not match the specifications.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Make any accessories are installed correctly and are the correct specification.2. Switch off, then switch on the machine, GP 10.3. Ensure that all connectors on the drive PWB, PL 1.10 Item 4 and the ESS PWB, PL 3.10 Item 6 are securely...