Articles

003-942, 956 Document Size Auto Detect RAP003-942 The document size cannot be automatically detected.003-956 Undefined document size was detected when platen is selected and only APS requires document size selection.ProcedurePerform the steps that follow:1. Advise the customer to input an appropriate value for the document size, then retry the job.2. Perform the procedures that follow as necessary:• 005-194 Size Mismatch Jam on SS Mix-Size RAP• 005-196, 198, 199, 946, 948, 949, 950 Size Mismatch Jam RAP3. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's...

003-941 Insufficient Page Memory RAP003-941 There is not enough page memory to store the image.ProcedurePerform the steps that follow:1. Advise the customer to change the job parameters, then retry the job.2. Ensure the memory SD card, PL 3.10 Item 11 is installed.3. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759...

003-930, 932, 934, 935, 940 Insufficient Memory RAP003-930 Insufficient memory detected.003-932 Insufficient memory detected.003-934 Insufficient memory detected.003-935 Insufficient memory detected.003-940 Insufficient memory detected.ProcedurePerform the steps that follow:1. Advise the customer to cancel the job then to clear the B/W setting for color mode or the side 2 cover image setting, then retry the job.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North...

003-795 AMS Limit Error RAP003-795 AMS (auto reduce/enlarge) limit error.ProcedurePerform the steps that follow:1. Advise the customer to cancel the job then to change the job properties.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752...

003-780 Scan Image Compression Error RAP003-765 Fax scan compression error.ProcedurePerform the steps that follow:1. Advise the customer to cancel the job then to change the scan resolution parameter and then retry the job.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America...