Articles

005-197 Prohibited Size Combination RAPBSD-ON: BSD 5.3 DADF Document Size Sensing (2 of 2)005-197 A prohibited size combination was detected.ProcedureRefer the customer to the user documentation regarding document size combinations.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):• 106R03749 106R03752 106R03751 106R03750• 106R03745 106R03748 106R03747 106R03746•...

027-727 Extension Server Parameters RAP027-727 Application interface during web service - invalid parameter.ProcedurePerform the steps that follow:1. Advise the customer to check the parameters for creating a job flow.2. If the fault persists, reload the software, GP 4.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and West Europe Region):• 106R03741 106R03744 106R03743 106R03742• 106R03757 106R03760 106R03759 106R03758• 106R03737 106R03740 106R03739 106R03738Toner Chip (For South America and East Europe Region):•...

005-147 DADF Pre Registration Sensor Off Jam During Inverting RAPBSD-ON: BSD 5.4 Document Feeding (1 of 2)005-147 After the DADF feed motor started the reverse rotation at invert operation, the DADF pre registration sensor did not turn off within the specified time.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check a Motor.• GP 7 How to Check a Sensor.•...

005-136 DADF Side 2 Registration Sensor On Jam RAPBSD-ON: BSD 5.6 Document Scan, Invert and Exit Transportation005-136 After the DADF pre registration sensor turned on at invert operation, the DADF registration sensor did not turn on within the specified time.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check a Motor.• GP 7 How to Check a Sensor.• GP 8...

005-135 DADF Side 2 Pre Registration Sensor On Jam RAPBSD-ON: BSD 5.4 Document Feeding (1 of 2)005-135 After the DADF feed motor started the reverse rotation at invert operation, the DADF pre registration sensor did not turn on within the specified time.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Refer to the procedures that follow as necessary:• GP 6 How to Check a Motor.• GP 7 How to Check a Sensor.•...