Articles

012-283, 012-284 Set Clamp Home Sensor Fail Entry RAP012-283 The set clamp home sensor failed to actuate within the specified time.012-284 The set clamp home sensor failed to deactuate within the specified time.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-283A, 012-284A Set Clamp Home Sensor Fail RAP.• Office finisher LX installed, 012-283B, 012-284B Set Clamp Home Sensor Fail RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and...

012-259, 012-280 Eject Home Sensor Fail RAPBSD-ON: BSD 12.6 Integrated Office Finisher Set Eject (1 of 2)012-259 The eject home sensor failed to actuate within the specified time.012-280 The eject home sensor failed to deactuate within the specified time.Initial ActionsWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the eject home sensor, PL 12.26 Item 9 is correctly installed, not broken and has no foreign object.• Switch off, then switch...

012-224B, 012-263B Rear Tamper Home Sensor Fail RAPBSD-ON: BSD 13.3 Office Finisher LX Interlock SwitchingBSD-ON: BSD 13.9 Office Finisher LX Tamping and Offset (1 of 2)BSD-ON: BSD 13.10 Office Finisher LX Tamping and Offset (2 of 2)ProcedureNOTE: Ensure the correct RAP is performed, refer to the 012-224, 012-263 Rear Tamper Home Sensor Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Manually operate the tamper mechanism. The tamper mechanism...

012-224A, 012-263A Rear Tamper Home Sensor Fail RAPBSD-ON: BSD 12.4 Integrated Office Finisher Tamping and OffsetInitial ActionsNOTE: Ensure the correct RAP is performed, refer to the 012-224, 012-263 Rear Tamper Home Sensor Fail Entry RAP.WARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.• Check the rear tamper home sensor, PL 12.25 Item 9 is correctly installed and has no foreign object and that the actuator is not broken.• Switch off, then...

012-224, 012-263 Rear Tamper Home Sensor Fail Entry RAP012-224 The rear tamper home sensor failed to actuate within the specified time.012-263 The rear tamper home sensor failed to deactuate within the specified time.ProcedureGo to the relevant procedure:• Integrated office finisher installed, 012-224A, 012-263A Rear Tamper Home Sensor Fail RAP.• Office finisher LX installed, 012-224B, 012-263B Rear Tamper Home Sensor Fail RAP.**This RAP is from Xerox Service Manual. All brand names and trademarks are their respective owner's property.**You may be also interested in below toner and drum chip (CRUM) for Xerox VersaLink C7020, C7025, C7030, C7000.Toner Chip (For North America and...