Articles

124-320 SEEPROM Fail RAP124-320 Write error occurred in the SEEPROM on the ESS PWB.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.Perform the steps that follow:1. Switch off, then switch on the machine, GP 10.2. Ensure that all connectors on the ESS PWB, PL 3.10 Item 6 are securely connected. Ensure all surface mounted modules are securely connected.3. Reload the software, GP 4.4. If the fault persists, install a new ESS...

124-319 DC132 Error 08 RAP124-319 Stored data mismatch. Internal control error was detected.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists. If YES, go to 3. If NO, go to 2.2. Perform SCP 5 Final Actions.3. Enter dC131. Compare NVM values 700-606, 700-607 and 700-608. The 3 values match. If YES, go to 5. If NO, go to 4.4....

124-315, 317, 355 DC132 Error 02, 04 and 14 RAP124-315 Stored data mismatch. Internal control error was detected.124-317 Stored data mismatch. Internal control error was detected.124-355 At least one set of territory information at the 3 locations is different.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists.2. Perform SCP 5 Final Actions.3. Enter dC131 Compare NVM values 700-600, 700-601...

124-313, 124-356 DC132 Error 10 RAP124-313 Stored data mismatch. The serial numbers do not match.124-356 Serial number 1 point mismatch.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists. If YES, go to 3. If NO, go to 2.2. Perform SCP 5 Final Actions.3. Enter dC132 Device ID and Billing Data. The 3 values match. If YES, go to 5....

124-312, 124-357 DC132 Error 12 RAP124-312 Stored data mismatch. The product number did not match.124-357 Product number 1 point mismatch.ProcedureWARNING: Ensure that the electricity to the machine is switched off while performing tasks that do not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause death or injury. Moving parts can cause injury.1. Switch off, then switch on the machine, GP 10. The fault persists. If YES, go to 3. If NO, go to 2.2. Perform SCP 5 Final Actions.3. Enter dC132 Device ID and Billing Data. The 3 values match. If YES, go to 5....